Fortinet FortiSwitch 248E-POE
This PoE-enabled switch is a great choice for large organizations needing to connect and power many network devices. The FortiSwitch 248E-POE simplifies the deployment of devices such as IP phones, surveillance cameras, and access points by providing power through network cables. It integrates with the Fortinet security platform, ensuring comprehensive network management and protection. This switch is suitable for PoE-heavy use cases and high-performance requirements. The FortiSwitch 248E-POE also helps reduce time and costs for equipment installation.
Total Network Interfaces
48x GE RJ45 ports and 4x GE SFP ports
Dedicated Management 10/100 Port
1
RJ-45 Serial Console Port
1
Form Factor
1 RU Rack Mount
Power over Ethernet (PoE) Ports
24 (802.3af/802.3at)
PoE Power Budget
370 W
Mean Time Between Failures
> 10 years
Switching Capacity (Duplex)
104 Gbps
Packets Per Second (Duplex)
155 Mpps
MAC Address Storage
16 K
Network Latency
< 1µs
VLANs Supported
4 K
Link Aggregation Group Size
8
Total Link Aggregation Groups
Up to number of ports
Packet Buffers
1.5 MB
Memory
512 MB DDR3
Flash
128 MB
ACL
512
Spanning Tree Instances
32
Route Entries (IPv4/ipv6)
64/64
Host Entries (IPv4/IPv6)
512/512
Height x Depth x Width (inches)
1.73 x 16.1 x 17.3
Height x Depth x Width (mm)
44 x 410 x 440
Weight
12.12 lbs (5.5 kg)
Power Required
100–240V AC, 50/60 Hz
Power Supply
AC built in
Redundant Power
Optional FRPS-740
Power Consumption* (Average / Maximum)
457.46 W / 466.47 W
Heat Dissipation
177.14268 BTU/h
Operating Temperature
32°F to 122°F (0°C to 50°C)
Storage Temperature
-4°F to 158°F (-20°C to 70°C)
Humidity
10% to 90% non-condensing
Air-Flow Direction
side-to-back
Noise Level
34.2 dBA
This product is often viewed with
