Fortinet FortiSwitch 448E-POE
The FortiSwitch 448E-POE provides all the features of the 448E with the added benefit of Power over Ethernet (PoE) support. It’s designed to power devices such as IP phones, cameras, and access points directly through network cables, making it a cost-effective solution for large networks. This switch simplifies installation and reduces the need for additional power infrastructure. It integrates with Fortinet’s security solutions to offer centralized management and robust security. The FortiSwitch 448E-POE is perfect for businesses with many PoE devices that need a reliable, high-performing network solution.
Total Network Interfaces
48x GE RJ45 and 4x 10GE SFP+ ports
Note: SFP+ ports are compatible with 1 GE SFP
Dedicated Management 10/100 Port
1
RJ-45 Serial Console Port
1
Form Factor
1 RU Rack Mount
Power over Ethernet (PoE) Ports
48 (802.3af/at)
PoE Power Budget
421 W
Mean Time Between Failures
> 10 years
Switching Capacity (Duplex)
176 Gbps
Packets Per Second (Duplex)
262 Mpps
MAC Address Storage
32 K
Network Latency
<1µs
VLANs Supported
4 K
Link Aggregation Group Size
8
Total Link Aggregation Groups
Up to number of ports
Packet Buffers
4 MB
Packet Buffers
4 MB
Memory
1GB DDR4
Flash
256 MB
ACL
1.5k
Spanning Tree Instances
32
Route Entries (IPv4/IPv6)
16k/8k
Multicast Route Entries
4k
Host Entries (IPv4/IPv6)
16k/7k
Height x Depth x Width (inches)
1.73 x 16.1 x 17.3
Height x Depth x Width (mm)
44 x 410 x 440
Weight
13.8 lbs (6.26 kg)
Power Required
100–240V AC, 50/60 Hz
Redundant Power
Redundant AC
Power Supply
AC built in
Power Consumption* (Average / Maximum)
440.12 W / 442.234 W
Heat Dissipation
163.066 BTU/h
Operating Temperature
32°F to 122°F (0°C to 50°C)
Storage Temperature
-4°F to 158°F (-20°C to 70°C)
Humidity
10% to 90% non condensing
Air-Flow Direction
side-to-back
Noise Level
38.3 dBA
